DAG 8.1X single-port Network Monitoring Card

Dag 5.2x product shot

The Endace® DAG® 8.1X Network Monitoring Card has been optimised for 10 Gigabit Ethernet networks. It provides line rate network traffic capture and sustained 10Gbps data transfer to the host server. An efficient interrupt-free and zero-copy DMA data path from the card to analysis software enables solutions to scale for next generation 10GigE networks. With precise packet time-stamping to nanosecond resolution complete visibility is provided into network behaviour.

Technical Specification

Optical Interface 1x XFP transceiver MMF 850nm LC optical connector1, or;
1x XFP transceiver SMF 1310nm LC optical connector2, or;
1x XFP transceiver SMF 1550nm LC optical connector3.
Network TypeIEEE802.3ae Ethernet:
1 10GBase-SR
2 10GBase-LR
3 10GBase-ER
Time Synchronization External: ‘RJ45’ connector for RS-422 PPS Signal
from GPS or CDMA receiver
Internal: Host PC clock
Also able to synchronize with other DAG cards
Packet Timestamping 7.5ns clock resolution
PCI Interface 8-lane PCI Express
Minimum Systems Requirements LINUX® version 2.4.x, 2.6.x (32-bit and 64-bit)
FreeBSD 4.x, 5.x, 6.x (32-bit) or Windows Server™
2000 (32-bit) / 2003 (32-bit and 64-bit)
Intel® Xeon® 1.8Ghz or faster, 1GB RAM, 1 GB disk space for tools installation
One free PCI-e slot supporting 8-lane operation.
Power Requirements Conforms to PCIe 1.1
Operating Temperature 0 to 55 deg C
Operating Humidity 5 to 95% non condensing
Physical Dimensions Half height, half length PCI3.0
Height 68.9mm (2.71”)
Length 169.2mm (6.66”)
*This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.